Product Manual

Field Description
File Single File
1. Press OK in the DATA IMPORT screen to proceed to the USB memory stick file directory.
2. Select the file on the USB memory stick to be imported and press OK.
3. Define the Job name for the imported file, and, if requested, the file definition and layers,
and press OK to import. If a Job with the same name already exists in the internal mem-
ory, a message will appear with the options to overwrite the existing job or rename the job
for the file being imported.
4. A message will display once the file has been successfully imported.
12.4 Working with a USB Memory Stick
Zoom_008
Lift the lid covering the USB host port on
the instrument.
Insert the USB memory stick into the USB
host port.
Always return to the Main Menu before removing the USB memory stick.
GeoMax cannot be held responsible for data loss or any other error that may occur when using a
USB memory stick.
•
Keep the USB memory stick dry.
•
Use it only within the specified temperature range.
•
Protect the USB memory stick from direct impacts.
Failure to follow these instructions could result in data loss and/or permanent damage to the
USB memory stick.
12.5 Working with Bluetooth
The instruments can communicate with external devices via a Bluetooth connection. The instru-
ment Bluetooth is a slave only. The Bluetooth of the external device will be the master, and
therefore will control the connection and any data transfer.
Import data step-by-step
Insert a USB memory stick
step-by-step
☞
☞
☞
Description
116 Data Management