Product Manual

WARNING
If the product is improperly disposed of, the following can happen:
•
If polymer parts are burnt, poisonous gases are produced which may impair health.
•
If batteries are damaged or are heated strongly, they can explode and cause poisoning,
burning, corrosion or environmental contamination.
•
By disposing of the product irresponsibly you may enable unauthorised persons to use it in
contravention of the regulations, exposing themselves and third parties to the risk of severe
injury and rendering the environment liable to contamination.
Precautions:
▶
The product must not be disposed with household waste.
Dispose of the product appropriately in accordance with the national
regulations in force in your country.
Always prevent access to the product by unauthorised personnel.
Product-specific treatment and waste management information is available from GeoMax
AG.
WARNING
Only GeoMax authorised service workshops are entitled to repair these products.
1.6 Laser Classification
1.6.1 General
The following chapters provide instructions and training information about laser safety according
to international standard IEC 60825-1 (2014-05) and technical report IEC TR 60825-14
(2004-02). The information enables the person responsible for the product and the person who
actually uses the equipment, to anticipate and avoid operational hazards.
☞
According to IEC TR 60825-14 (2004-02), products classified as laser class 1,
class 2 and class 3R do not require:
•
laser safety officer involvement,
•
protective clothes and eyewear,
•
special warning signs in the laser working area
if used and operated as defined in this User Manual due to the low eye hazard level.
☞
National laws and local regulations could impose more stringent instructions for the
safe use of lasers than IEC 60825-1 (2014-05) and IEC TR 60825-14 (2004-02).
General
Safety Directions 11