Product Manual

i Height difference to hinge
point
j Height difference to align-
ment
Defined chainage and increment values will not be considered in the application Check.
Press Ch Slp from the Define Setout/Check/Slope values screen.
Field Description
Offset Defined horizontal offset. Left, Right or Center.
Chainage Current chainage from measured point.
Offs.Hng Offset to hinge. Measured offset to the horizontal alignment
including offset right and offset left.
dH Hinge Height difference to the hinge point. The vertical offset between
the defined height at the current chainage, and the measured
position including defined height difference.
Act. Slp The measured slope ratio of the measured point to the hinge
point.
sDIST Hng Slope distance from the measured point to the hinge point.
Z Height value of the measured point.
Offs.Aln Measured offset to the horizontal alignment excluding offset right
and offset left.
dH Aln Height difference to the alignment. The vertical offset between
defined height at the current chainage, and the measured posi-
tion, excluding the defined height difference.
sDIST Aln Slope distance from the measured point to the alignment.
•
Either, press ALL to measure and record.
•
Or, press ESC to return to the Define Setout/Check/Slope values screen.
•
Or, continue selecting ESC to exit the application.
11.14 Traverse
11.14.1 Overview
Traverse is a program used to establish control networks whereby other survey operations such
as topographic surveys or point stake outs can be completed.
☞
Access
SLOPE CHECK HINGE
Next step
Description
Applications 105