Product Manual

Field Description
Act. Ch. The measured chainage.
Offs.Aln Measured offset to the horizontal alignment excluding offset right
and offset left.
dAln Height difference to the alignment. The vertical offset between
defined height at the current chainage, and the measured posi-
tion, excluding the defined height difference.
sDIST Aln Slope distance from the measured point to the alignment.
Cut situation
TSOX_057
c
d
a
b
P1
P2
P2
P1 Measured point
P2 Catch point
a Horizontal alignment
b Hinge point
c Cut
d D Offset to catch point
Fill situation
TSOX_058
a
b
d
c
P1
P2
P2
P1 Measured point
P2 Catch point
a Horizontal alignment
b Hinge point
c Fill
d D Offset to catch point
•
Either, press ALL to measure and record.
•
Or, press ESC to return to the Define Setout/Check/Slope values screen.
11.13.7 Check Slope
The application Check Slope is used for as-built checks and to get information about slopes, for
example on a natural surface. If the parameter offset left/right and height difference are not
entered, the point on the horizontal alignment is the hinge point.
TSOX_055
e
f
a
c
b
h
i
j
g
d
P1
P1 Measured point
a Horizontal alignment
b Defined offset
c Defined height difference
d Hinge point
e Actual slope
f Natural surface
g Offset to hinge point
h Offset to alignment
Sign convention
Next step
Description
104 Applications