Product Manual

Defined chainage and increment values will not be considered in the application Check.
Press Check from the Define Setout/Check/Slope values screen.
Field Description
Offset Defined horizontal offset. Left, Right or Centre.
Chainage Current chainage from measured point.
Offset Perpendicular offset to alignment.
Ht. Diff. Height difference between the measured point and the defined
height.
dE Calculated difference in Easting coordinate between the meas-
ured point and the alignment element.
dN Calculated difference in Northing coordinate between the meas-
ured point and the alignment element.
•
Either, press ALL to measure and record.
•
Or, press ESC to return to the Define Setout/Check/Slope values screen.
11.13.6 Slope Setout
The application Slope Setout is used to stake out the catch point, which is the intersection point
of a defined slope with the natural surface.
The slope is always defined as starting from a hinge point. If the parameter offset right/left and
height difference are not entered, the point at the defined chainage on the horizontal alignment
is the hinge point.
☞
Access
3D-Road Check
Next step
Description
Applications 101