Product Manual

☞
To find/enter codes, press the FNC/Favourites key and select Coding.
Field Description
Chn Selected chainage to stake out.
dH.A. Angle offset: Positive if the stake out point is to the right of the measured
point.
d.H.D. Horizontal offset: Positive if the stake out point is further away than the
measured point.
d.d.z. Height offset: Positive if the stake out point is higher than the measured
point.
dCh Longitudinal offset: Positive if the stake out point is further away than the
measured point.
dOf Perpendicular offset: Positive if the stake out point is to the right of the
measured point.
Def.East Calculated East coordinate of the stake out point.
Def.North Calculated North coordinate of the stake out point.
Def.Hght Calculated Height of the stake out point.
•
Either, press ALL to measure and record.
•
Or, press ESC to return to the Define Setout/Check/Slope values screen.
11.13.5 Check
The application Check is used for as-built checks. The points can be measured or selected from
the memory. The chainage and offset values are relative to an existing horizontal alignment, and
the height difference is relative to a vertical alignment or manually entered height.
TSOX_053
a
P1
P2
c+
d+
b
c-
d-
P0
P0 Instrument station
P1 Target point
P2 Target point
a Horizontal alignment
b Chainage
c+ Offset, positive
c- Offset, negative
d+ Height difference, positive
d- Height difference, nega-
tive
SETOUT
Next step
Description
100 Applications