Manualshelf

User's Guide

ManualsBrandsGEOMATE POSITIONING ManualsSatellite SystemsGeodetic GNSS Receiver
41424344454647484950
Equipment Setup and Operation
GEOMATE SG7 GNSS USER GUIDE
|
2022-04
P
a
g
e
|
50
For Reference Station Mode, there are three modes available:
a) Auto Rover: The receiver will serve as a rover after this mode is enabled, and then
receive correction data through the working mode set last time.
b) Auto Base: The receiver will serve as a base after this mode is enabled, and then
broadcast correction data based on coordinate inputted by user or obtained through
autonomous positioning automatically.