User's Guide

Equipment Setup and Operation
GEOMATE SG7 GNSS USER GUIDE | 2022-04 P a g e | 33
(3) Screw the receiver onto the tribrach.
(4) Center and level the receiver more precisely.
(5) Connect the receiver to external battery by using external power cable if necessary.
(6) Connect the receiver to external storage disk by using USB cable if necessary.
(7) Turn on the receiver by pressing the power button for 3 s.
(8) Measure the antenna height by using H.I. tape and auxiliary H.I. tool.
(9) Press the function button to select Data to start recording static raw.
If work with a data controller:
(10) Switch on the data controller and connect it to the receiver.
(11) Use software to configure the receiver as static mode.