User's Guide

Front Panel Operation
GEOMATE SG7 GNSS USER GUIDE | 2022-04 P a g e | 25
Power
Power 95%
Indicates the remaining power of the
battery
Set
Brightness High
Press Enter to select the brightness
including High, Medium and low.
Standby Time 10s
Press Enter to select standby time
including 5s, 10s, 30s, 1min, 30min
Sleep Time 1min
Press Enter to select sleep time
including 5s, 10s, 30s, 1min, 30min
WIFI ON
Press Enter to turn on or turn off WIFI.
WIFI Mode AP
Press Enter to change the WIFI Mode
including AP or STA. (The function is
unavailable when WIFI is off)
4G SIM
Press Enter to change the 4G status
including eSIM or SIM.
Channel Detection
Only work on rover mode.
OEM Board Reset
Press Enter to reset board.
Language English
Press Enter to change languages
(English or Chinese).
Voice Off
Press Enter to turn on or turn off voice.
Back
Press Enter to back to last page.
Mode
Base External UHF
Base Internal UHF
Base APIS
Base External UHF & APIS
Rover APIS
Rover UHF
Rover NTRIP
Back
• Press Enter button to enter the
configuration screen of the selected
working mode.
• More operation information, see 3.2
Configure the Working Mode.
The details of Data operations are as follows:
Top-level Menu
Second-level Menu
Description
Data
Set on/off
Press Enter button to switch static
measurement on or off.
Recording 00:00
Display the time of recording
Advanced
Sample
Press Enter to change sample interval
(1s, 2s, 5s, 10s, 15s, 30s, 1m)