User's Guide

Getting Started with
SG7
GEOMATE SG7 GNSS USER GUIDE | 2022-04 P a g e | 12
Port
Name
Description
IO port
 This port is a 7-pin LEMO connector that
supports RS-232 communications and
external power input.
 Users can use HCE600 Type-c Cable supplied
with the system to realize RS-232
communications between the receiver and
computer or controller. Also, users can use a
7-pin cable to transmit differential data to an
external radio.
USB port
 This port is a type-C USB connector that
supports USB communications.
 Users can use USB Cable supplied with the
system to download the logged data to a
computer.
Radio antenna
connector
 Connect a radio antenna to internal radio of
the receiver. And this connector is not used if
you are using an external radio.