User's Manual

GLX-RSS-4 User Manual
Page 8 of 16
3. RSS-4 Radar Sensor Installation
The Surveillance Radar Sensor installation should be done by skilled personnel to
avoid any damage to the device. Radar Sensor can be pole mounted or mounted to the
fixed object. It is also possible to mount Surveillance Radar Sensor to the tripod for
mobile applications.
Fixing of the Surveillance Radar Sensor is done by four M6 screws on the back
side of the device. Maximal length of the screws penetrating to the mounting hole on
the back side of the device must be less than 8mm. All four screws must be used for
safe operation of the device. Drawing of mounting hole spacing and dimension for RSS-
4 sensor is shown on the picture 3.
Picture 3. Radar mounting guidelines