User's Manual

GLX-RSS-4 User Manual
Page 14 of 16
be larger, and it can be simple calculated from basic geometry. To decrease
minimal detection distance tilt down of the sensor can be used. It is
recommended to keep tilt down in range from 0° to 9°.
• When using wireless links to connect radar sensors to control center or some
other radio frequency equipment is used on the location it is recommended to
move antennas of this equipment minimum 2m from the RSS-4 radar sensor.
• When mounting RSS-4 radar sensors to the pole it is mandatory to ground the
pole and to implement lighting protection of the pole. RSS-4 radar sensor are
very robust designed and have protected all power supply and communication
lines internally, but lighting protection is not implemented for direct lighting
strike to the device or mounting pole.