Operating Instructions
Table Of Contents
- 1 Scope of supply
- 2 Order numbers
- 3 Basic safety instructions
- 4 Introduction
- 5 Installing the OTT SVR 100
- 6 SDI-12-commands and responses
- 7 Performing maintenance work
- 8 Repairs
- 9 Information on disposal of old devices
- 10 Troubleshooting
- 11 Technical Data
- Appendix A – Connecting the OTT SVR 100 to OTT netDLvia the RS-485 interface
- Appendix B – Wall bracket dimensions/mounting hole positions
- Appendix C – Note on the declaration of conformity
- Appendix D – RS-485 interface with Modbus protocol (RTU)
- Appendix E – OTT SVR 100 Operating Program
OTT RLS OTT SVR 100
Fig. 4: Example application 2:
OTT SVR 100 installed on an auxiliary
structure, e.g. a cantilever arm.
The projection of the OTT SVR 100 radar
footprint on the water surface is elliptical.
In the example shown here, the water level
is determined using a contactless OTT RLS
radar sensor.
8