Operating Instructions
Table Of Contents
- 1 Scope of supply
- 2 Order numbers
- 3 Basic safety instructions
- 4 Introduction
- 5 Installing the OTT SVR 100
- 6 SDI-12-commands and responses
- 7 Performing maintenance work
- 8 Repairs
- 9 Information on disposal of old devices
- 10 Troubleshooting
- 11 Technical Data
- Appendix A – Connecting the OTT SVR 100 to OTT netDLvia the RS-485 interface
- Appendix B – Wall bracket dimensions/mounting hole positions
- Appendix C – Note on the declaration of conformity
- Appendix D – RS-485 interface with Modbus protocol (RTU)
- Appendix E – OTT SVR 100 Operating Program
9 Information on disposal of old devices
Within the member states of the European Union
In compliance with the Electrical and Electronic Equipment Act (ElekrtroG; national
implementation of EU Directive 2002/96/EC) OTT will take back and properly
dispose of old devices in the member states of the European Union. Affected
devices are indicated by the adjacent symbol.
" For further information about the return procedure, please contact your local
sales contact. You will find the addresses of all sales partners in the internet on
"www.ott.com". Please take into consideration also the national implementation
of the EUR guideline 2002/96/EC of your country.
For all other countries
" After decommissioning, dispose of the OTT SVR 100 properly.
"
Comply with the applicable regulations for disposal of electronic devices in
your country.
" Never dispose of the OTT SVR 100 with normal household waste.
Materials used
See Chapter 11, Technical data
23