User's Manual

LX-80 User Manual
Page 29 of 32
Set minimum
deadzone value
aXGDZ0+f!
a+f<CR><LF>
+f – deadzone minimum value, sensor
will not report measurement lower
than this
Get maximum
deadzone value
aXGDZ1!
a+f<CR><LF>
+f – deadzone maximum value, sensor
will not report measurement lower
than this
Set maximum
deadzone value
aXGDZ1+f!
a+f<CR><LF>
+f – deadzone maximum value, sensor
will not report measurement lower
than this
Get sensor
height value
aXGSHR!
a+f<CR><LF>
+f – sensor height above riverbed
Set sensor
height value
aXGSHR+f!
a+f<CR><LF>
+f – sensor height above riverbed
Get current
staff gauge
reading
aXGSGR+f!
a+f<CR><LF>
+f – current staff gauge reading, device
will calculate sensor height above
riverbed as: staff gauge reading +
distance from sensor to water
Get average
time in second
for level
aXGLAV!
a+f<CR><LF>
+f – averaging time in seconds
Set average
time in second
for level
aXGLAV+f!
a+f<CR><LF>
+f – averaging time in seconds
Device supports all other commands required by SDI-12 v1.3 and will respond to them
but all relevant data can be acquired by using the commands from the table above.