User Manual

www.geolink.io

User Manual (1.3) OpenTracker 2 11

SMS Commands

Summary of the SMS commands for the initial configuration. The unit will accept only one command at

a time and send a reply on successful command execution (this may take a while).

Command

Syntax

Example

Set APN

#PASS,apn=NEWAPN

#pass,apn=internet

APN saved

Set APN Username

#PASS,gprsuser=NEWUSERN

#pass,gprsuser=guest

APN username saved

Set APN Password

#PASS,gprspass=NEWPASS

#pass,gprspass=guest

APN password saved

Set SMS Password

#PASS,smspass=NEWSMSPASS

#pass,smspass=newpass

SMS password saved

Set Sending Interval

(sec)

#PASS,int=INTERVAL_SECONDS

#pass,int=60

Interval saved

Set SIM Pin

#PASS,pin=NEW_PIN

#pass,pin=1234

PIN saved

Please allow some time for the device to reboot after the last SMS reply. Do not immediately

turn it off.

To use the Geolink web interface (www.geolink.io) you need to register your OpenTracker device.

Please follow this guide: https://geolink.io/guide.php

Make sure your device is configured, powered and ignition is on, so that it connects to the

tracking server.