User guide

36
GeoDesy Kft. Telefon: [phone]
H-1116 Budapest, Kondorfa str. 6-8. Fax.: [phone]
E-mail: [e-mail]
http://www.geodesy.hu
9.Click on Run application button:
the laser head will restart with the
new software.
10. Click on the Disconnect button and close the program.
9.3 Network Interface software update
1. Connect the RS232 cable between the laser head and the PC.(Network Interface
RS232)
2. Enter into the management of the laser head and into the device info.
4.Click on the „Update” button.
5.Click on OK button.
6. Start the Total Commander program and start PIC32.exe program.
7. Choose COM1 port.
8.Click ont the Connect button.