Owner's manual

58
Attribute
Description
Acct-Interim-Interval (85)
If present in Access-Accept chilli will generate interim accounting
records with the specified interval (seconds).
MS-MPPE-Send-Key
(311,16)
Used for WPA
MS-MPPE-Recv-Key
(311,17)
Used for WPA
9.2.2 WISPr Attributes
Description
Location ID is set to the radiuslocationid option if present.
Should be in the format: isocc=,
ccE.164_Country_Code>, acE.164_Area_Code>,
networkssid/ZONE>
Location Name is set to the radiuslocationname option if
present. Should be in the format: ,
Included in Access-Request to notify the operator of the
log off URL. Defaults to " http://uamlisten:uamport/logoff".
If present the client will be redirected to this URL once
authenticated.
This URL should include a link to WISPr-Logoff-URL in
order to enable the client to log off.
Maximum transmit rate (b/s). Limits the bandwidth of the
connection.
Note that this attribute is specified in bits per second.
Maximum receive rate (b/s). Limits the bandwidth of the
connection.
Note that this attribute is specified in bits per second.
The time when the user should be disconnected in ISO
8601 format (YYYY-MM-DDThh:mm:ssTZD).
If TZD is not specified local time is assumed.
For example a disconnect on 18 December 2001 at 7:00
PM UTC would be specified as 2001-12-
18T19:00:00+00:00.
9.2.3 ChilliSpot Attributes
Description
Maximum number of octets the user is allowed to transmit.
After this limit has been reached the user will be
disconnected.
Maximum number of octets the user is allowed to receive.
After this limit has been reached the user will be
disconnected.
Maximum total octets the user is allowed to send or
receive.
After this limit has been reached the user will be
disconnected.
Maximum bandwidth up