Owner's manual

27
7.2.5 Wireless Mode: Access Point
Use Basic Wireless Settings to setup radio interface of the device.
Basic Wireless Settings
SSID – specify the SSID of the wireless network device.
Broadcast SSID – enables or disables the broadcasting of the SSID for AP.
IEEE mode – specify the wireless network mode.
Channel width – The default channel bandwidth for 802.11 radio is 20MHz. The 802.11n allow
channel bonding in such way the total channel width becomes 40MHz.
Channel – select the channel from the drop-down list or option Auto for autochannel. Automatic
channel selection allows Access Point to select a channel which is not used by any other wireless
device or, if there are no free channels available - to select a channel which is least occupied.
Channel list – select the channels to create a channel list for autochannel.
Security Settings
Both sides (AP and Station) of the link must have the same security settings.
Device supports various authentication/encryption methods: