User guide
GeoDesy Kft.
H-1116 Budapest, Kondorfa str
. 6
Trap event list
Alert disabled: there is no alert coming up for this trap
Temperature: The agent will send an alarm if the value goes above the preset value.
For further details please see
Detector:
The agent will send an alarm if the value goes above the preset value. For
further details please see
Detector alert level in the
Transmitter: if the transmitter fails
Power supply: if the power supply reports fault the agent will send the alarm.
Receiver: If the receiver gets into disabled the agent will send an alarm.
details please see RX OK
in the
Remote Failure: If the local head loses the connetion to the remote head the agent
will send an alarm. For further details please see
info screen chapter
FSO Link:The Agent will send an alarm if the valid signal is
please see FSO Link
in the
TP Link: The Agent will send an alarm if the connection is lost on the local TP port.
For further details please see
Traffic
error: The agent will send an alarm if any of the values on the
statistics page
is incremented.
Telefon: 06
. 6
-8.
E-mail:
info@geodesy
http://www.
50
Alert disabled: there is no alert coming up for this trap
Temperature: The agent will send an alarm if the value goes above the preset value.
For further details please see
Temperature alert level in the
Device Setup
The agent will send an alarm if the value goes above the preset value. For
Detector alert level in the
Device Setup
chapter.
Transmitter: if the transmitter fails
operating the agent will send an alarm.
Power supply: if the power supply reports fault the agent will send the alarm.
Receiver: If the receiver gets into disabled the agent will send an alarm.
in the
Status info screen chapter
Remote Failure: If the local head loses the connetion to the remote head the agent
will send an alarm. For further details please see
Remote is visible
FSO Link:The Agent will send an alarm if the valid signal is
lost.
. For further details
in the
Status info screen chapter.
TP Link: The Agent will send an alarm if the connection is lost on the local TP port.
For further details please see
TP_Link in the Status info screen
chapter.
error: The agent will send an alarm if any of the values on the
is incremented.
Telefon: 06
-1-481-2050
Fax.: 06-1-481-2049
info@geodesy
-fso.com
http://www.
geodesy-fso.com
Temperature: The agent will send an alarm if the value goes above the preset value.
Device Setup
chapter.
The agent will send an alarm if the value goes above the preset value. For
chapter.
operating the agent will send an alarm.
Power supply: if the power supply reports fault the agent will send the alarm.
Receiver: If the receiver gets into disabled the agent will send an alarm.
For further
Remote Failure: If the local head loses the connetion to the remote head the agent
Remote is visible
in the Status
. For further details
TP Link: The Agent will send an alarm if the connection is lost on the local TP port.
chapter.
error: The agent will send an alarm if any of the values on the
Network