User guide

GeoDesy Kft.
H-1116 Budapest, Kondorfa str
. 6
6.1.3 M
eanings of the LEDs
Power:
The head is powered up.
RX-OK:
Received beam is good
for communication
TP Lk:
Copper link between
the head and the Network
FO Lk:
The recived signal form the remote end is modulated and
R-V/TP:
Remote end is visible for the management system and there is TP connected to
remote end – same as TP-
Lk but displays it on the remote end.
Top Level LEDs:
Local Received level
Bottom Level LEDs:
Remote Sites
Received level
10
th
LED:
The 10 th LED has three functions showing that the recived level reached its
optimum this is green, it maximum it
is red
Telefon: 06
. 6
-8.
E-mail:
info@geodesy
http://www.
19
eanings of the LEDs
for communication
.
the head and the Network
equipment.
The recived signal form the remote end is modulated and
.
Remote end is visible for the management system and there is TP connected to
Lk but displays it on the remote end.
Received level
The 10 th LED has three functions showing that the recived level reached its
optimum this is green, it maximum it
is yellow or the receiver got saturated and this
Telefon: 06
-1-481-2050
Fax.: [phone]
info@geodesy
-fso.com
http://www.
geodesy-fso.com
Remote end is visible for the management system and there is TP connected to
The 10 th LED has three functions showing that the recived level reached its
is yellow or the receiver got saturated and this