User Manual
com
http://www.geodesy-fso.com
37
GeoDesy Kft. Telefon: 06-1-481-2050
H-1116 Budapest, Kondorfa str. 6-8. Fax.: 06-1-481-2049
E-mail: info@geodesy-fso.
The necessary power can be supported to the
head by the connector which can be seen in the
figure next to this text. Order of the cables from
the head: (the four-twisted-pair-wired cable)
• Not connected
• Red - +12V
• Twisted green-yellow - GND
• Black - -12V
1. Remove the connector from the slot
2. Connect the cables /using the cable shoe/
3. Reconnect the connector to the slot
4. Secure the connector in the slot /make sure it is seated securely,
connectors clips are latched/