Installation Instructions

PREMIUM
WINDOW, DOOR & ROOFING SEALANT
®
• Flexible • Paintable • Minimal Surface Prep • Can use in most weather conditions • Excellent adhesion to many building materials, even when damp
Basic Uses:
• Most non-traffic-bearing joints,
including those where structural
movement or stress is expected
• Primerless application
onto brick, concrete, stone,
metal, glass, treated and
untreated wood, and asphaltic
materials
• Where a paintable sealant is
required
• As a trim sealant for metal
components
1. PRODUCT NAME:
Ultima
®
Window, Door
& Roofing Sealant
2. MANUFACTURER:
Geocel Products Group
A Business Unit of
The Sherwin-Williams Company
(“Geocel Products Group”)
Cleveland, OH 44115
Phone: [phone]
Fax: [phone]
www.GeocelUSA.com
Composition and Materials:
Ultima Sealant is based on a
proprietary formulation of polymers
designed to provide optimum
flexibility, adhesion, and weather
resistance. Because of the inherent
flexibility of this material blend, the
sealant does not contain plasticizers
(added to many sealants to promote
flexibility) which tend to migrate out
4. INSTALLATION:
TECHNICAL
DATA
®
ULTIMA
Window, Door & Roofing Sealant
Ultima
®
Sealant is a single
component, high-performance
elastomeric sealant for use in a
wide variety of roofing, window,
door, siding, trim, architectural
metal, underdeck systems, solar
roof systems, manufacturing, and
general construction applications.
Product Benefits:
• Exceptional elongation and
flexibility
• Excellent adhesion to many
building surfaces, even when
damp
• UV resistant
• Resealable, may be applied
over itself
• Asphalt compatible
• Paintable
• Dirt pick-up resistant
• Easily applied, non-stringing
formulation
• Available in crystal clear and
white
of other sealants, causing hardening
and shortening their useful life. Due
to the mild solvent blend contained
in the sealant, Ultima is not a
flammable liquid according to
NFPA liquid guidelines. Its clear
formulation is literally clear as glass
from moment of application.
Grade: Gun grade consistency
Primer: Not required on most
surfaces. If primerless adhesion to a
particular substrate is in question, a
test application is recommended.
Contact Geocel Products Group's
Technical Service Department for
further information.
Packaging: 10.3 fl. oz. cartridge
Colors: Crystal clear and white
Limitations:
• Do not use on traffic-bearing
surfaces
• Do not use on extruded
polystyrene insulating sheathing
(styrofoam, etc.)
• Do not use on acrylic skylight
glazing surfaces
• Do not use in areas where food is
processed or stored
• For exterior use only due to odor
emitted during cure
• Do not use for potable water
applications
Joint Design: For optimum results,
joints should be a minimum of 4
times greater than anticipated
movement. Minimum recommended
joint size is 1/4" x 1/4". Maximum
joint size should be 1/2" x 3/8".
Surface Preparation: Priming is
not required unless specified above.
Joints should be basically clean and
surface dry, although dampness
from dew will not interfere with
adhesion. Do not use Xylol or MEK
®
3. PRODUCT DESCRIPTION: