User manual

Solo II CT: Consumpon 3
Welcome to geo’s energy management
service. You’ll nd everything you need
here to gain visibility and control of your
consumpon. Your new Solo II will help
you manage, regulate and visualise your
energy use – supporng you as you learn
more and more about energy eciency.
In this guide you’ll nd everything you
need to quickly and simply set up and start
using your display. You’ll also nd more
informaon about how the monitor works
and how it can help you. In consumpon
mode you can use the display to help you
reduce CO₂ and save money by giving
you real-me, visual feedback on your
energy consumpon.
Microgeneraon and
consumpon modes
The Solo II can measure either
consumpon (default) or microgeneraon
– but not at the same me. Please note
that when you have chosen either of
these modes then it is not advisable to
switch to the other. If you do, you will lose
the data you have been collecng (from
whichever mode you had previously set
up). If you choose to switch modes, the
display will reset to day one.
SAFETY INFORMATION
Keep the display away from water
Clean with a so, dry cloth
If any of the components appear
damaged, contact us
This is a self-installing display. There
is no need for you to connect or
disconnect any cabling – and you won’t
need access to your electricity meter
Do not t rechargeable baeries
To protect the environment, please
take your baeries to a recycling centre
for safe disposal
For use in a dry, indoor environment
only
Please only use the power supply
provided
This product is RoHS compliant and
CE approved
Using the oponal Web Pack, you will
also have access to energynote, our
online energy management service that
presents all your data in greater detail.
There is no limit to the amount of data
you can upload. See, analyse and explore
for years to come.
You should nd everything you need in
this guide, but if you don’t, get in touch
and we’ll be happy to help.