User manual

Solo II CT: Consumpon 13
Speedometer
The speedometer gives an up-to-date
graphical view of the amount of electricity
you are consuming or generang right
now depending on which mode you have
selected. The speedometer shows power
up to 21kW for consumpon mode and
will update every three seconds. For
microgeneraon it will depend on your
array size.
This shows how much electricity you
are consuming or generang right
now depending on which mode you
have selected. You can view this
in kWh, cost and carbon. You can
change how you display the units by
pressing the centre buon.
Lower numbers
These show how much energy has been
consumed or generated over the me
period you have asked it to show. You can
view this in cost, currency or carbon.
Budget bar and predicon
If you have set yourself a budget, then
the display shows if you are predicted
to be under or over your budget (today,
this week, this month) or were over/
under your budget (yesterday, last week,
last month).
The display predicts whether you will be
within your budget for the period shown.
It predicts this from your consumpon
so far, and its esmate of your future
consumpon based on how you have
used energy previously. If the display is
predicng you’ll be in budget then it will
show a ck, if it predicts you will be over
budget then it will show a cross. If neither
is shown then you are exactly on budget.
Segment index Step per segment (kW) Number of segments
1
‡
to 20 0.05 20
21 to 35 0.50 15
36 to 40 2.50 5
Upper numbers
50%
20%
33%
10%
±5%