UHF RFID Reader Max Faster GVR9040 User Guide Model: Max Faster GVR9040 FCC ID: 2AL59GVR9040
Max Faster GVR9040 User Guide Catalog 1 Introduction to Max Faster GVR9040 ............................................................................................ 2 1.1 Product Parameters................................................................................................................. 2 1.2 Feature .................................................................................................................................... 3 2 Installation..........................................
Max Faster GVR9040 User Guide 1 Introduction to Max Faster GVR9040 Max Faster GVR9040 is a stationary, four-port, UHF Reader, which is designed to support the EPC Class 1 Gen 2 (ISO 18000-6C/63) protocol. It has unparalleled advantages in providing high identification accuracy under long distance and fast speed. Its strong anti-interference features can adapt to complex electromagnetic environment, especially in the intelligent traffic management, logistics, mobile asset management, and other applications.
Max Faster GVR9040 User Guide Control mode Trigger/continuous WiFi Optional 4G Optional Applicable Characteristics Specifications Parameters Protection grade IP65 Working temperature -40℃ ~ +75℃ Storage temperature -40℃ ~ +85℃ Working humidity 5％~ 95％ RH Mechanical Characteristics Specifications Parameters Dimension 361mm×287mm×110mm Weight 6.
Max Faster GVR9040 User Guide Premium Performance: By adopting our patent technology -- multi-mode adaptive interference cancellation and suppression, it can automatically eliminate the interference outside the antenna; With high-standard receiving sensitivity, it guarantees the reception quality of tag identification; The employment of multi-core high-speed host CUP and Linux system enable its strong processing capability; Stability and Reliability: by employing industrial high-speed proces
Max Faster GVR9040 User Guide 2 Installation 2.1 System Composition The application system is mainly composed of UHF Tag, antenna, reader (interrogator) as well as the backend system (including server, router, etc.), the figure is as follow: Figure 1 Application System Equipment Functions are as follows: Tag: store identification information, etc. Antenna: signal conversion for interactive communication between reader and tag. Reader (Interrogator): it can be installed in the pole or beam.
Max Faster GVR9040 User Guide 2.2 Interfaces Interfaces include: power interface, GPIO, Ethernet, RS-485, status indicator, RF port, 4G and WIFI ports.
Max Faster GVR9040 User Guide Bracket FN4 PCS 1 Bracket FN6 PCS 1 M10*240 bolt assemblies Set 4 Figure 3 Bracket FN4 Figure 4 Bracket FN6 Fix bracket FN4 and bracket FN6 at the appropriate position on the pole by using four sets of M10*240 bolt assemblies: 7
Max Faster GVR9040 User Guide Figure 5 Bracket Installation Insert the bolt of the bracket FN6 into the holes on both sides of the reader, and then tighten the cap nuts: Figure 6 Equipment Installation The power and digital signal cables are shown in the following figures.
Max Faster GVR9040 User Guide Figure 7 Power Cable Figure 8 Digital Signal Cable 2.4 Connecting the Reader The Max Faster GVR9040 reader gives priority to network interface for device communication. The device is connected to the network device or PC via the dedicated communication cable as shown in the following figure: Figure 9 The Diagram of Equipment Connection 2.
Max Faster GVR9040 User Guide Figure10 The Reader-Backend Communication Procedure 3 Operation The reader supports the Low Level Reader Protocol (LLPR), but when carrying out equipment function test, specific operation process is conducted as follows. 3.1 Equipment Connection By default, the reader connects the device through the network cable. The default IP is 192.168.5.245. For devices with modified IP, the changed IP is used to connect.
Max Faster GVR9040 User Guide Figure 11 Connection Interface 3.2 RF Configuration The parameter configuration mainly involves the number of antennas, antenna No., transmitting power, encoding mode, reverse data rate and the selection of fixed or hopping frequency. Each parameter has a separate communication interface to facilitate testing. The specific configuration is described below. 3.2.1 Antenna Configuration The reader supports maximal four antennas to work at the same time.
Max Faster GVR9040 User Guide Figure 12 Antenna Configuration 3.2.2 Transmitting Power Configuration The reader supports the configuration and query of transmitting power ranging from 15dBm to 33dBm. Figure 13 Transmitting Power Configuration 3.2.3 Frequency Configuration The working frequency ranges from 902.75MHz to 927.25MHz. A total of 50 frequency points can be set up and queried. Figure 14 Frequency Configuration 3.2.
Max Faster GVR9040 User Guide Figure 15 Hopping Mode Configuration 3.2.5 Reverse Data Rate Configuration The reader supports the decoding of tag response data in the reverse rate ranging from 64K to 640K. The reverse data rate configuration tells the reader which reverse rate is currently in use for correct decoding. Figure 16 Reverse Data Rate Configuration 3.2.6 Encoding Mode Configuration Reader is set to support decoding with FM0, specifically M2, M4 and M8 encoding data.
Max Faster GVR9040 User Guide Figure 19 Tag Inventory Page Figure 20 Inventory Result 3.4 Upgrading The reader supports upgrade via web page. It can be logged in by entering the device IP address after opening the browser. The default device IP is 192.168.5.245. Select “App Upgrade” on top, click “Browse” to select the upgrade package file, and then click “Upgrade”. An upgrade success notification box will pop up once upgrade is completed. The device will then automatically restart.
Max Faster GVR9040 User Guide Figure 21 Web Log-in Page Figure 22 Web Upgrade Page 15
Max Faster GVR9040 User Guide 4 Safety Instruction User Requirement Please keep the equipment installed vertically or in steady place to prevent it from falling. Use the equipment only within the rated input and output range. Do not disassemble the equipment. Transport, use, and store the equipment within the permissible humidity and temperature range. This product must be installed by a professional installer, and non-professionals should not install or disassemble it at will.
Max Faster GVR9040 User Guide 5 FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
