Installation Instructions

Error! Use the Home tab to apply 标题 1 to the text that you
want to appear here.
FA50 Operation Manual 43
5.8.1.4Scan
Click “Scan” drop-down box, as shown in Fig. 5-8-5. The scan code
setting is divided into Auto and Manual. When the setting state is
Auto, the instrument will automatically switch to the item currently
being tested by scanning the barcode on the reagent card when the
sample is measured; when the setting status is Manual, the item
needs to be manually switched before the sample can be measured
for sample measurement.
Fig. 5-8-5