Installation Instructions

Error! Use the Home tab to apply 标题 1 to the text that you
want to appear here.
FA50 Operation Manual 21
5.5.2 ID Set
You can set the ID number before measuring the sample. The ID
number can be set to 1-99999999999999999999. You can also use
the default ID serial number, as shown in Fig. 5-5-3.
Fig. 5-5-3
5.5.3 STD Mode
If the current reagent batch has already been swiped, you do not
need to swipe it; if you replace the new batch of reagent cards, you
need to swipe the card again for the first measurement. For details
on the swipe process, see 5.8.3.6 Swipe card.
When the scan code setting status of the reagent card is automatic,
click “STD Mode”, the analyzer will recognize the barcode on the
reagent card, and automatically switch to the item to be tested. And
prompts ”Please insert reagent card with sample and confirm the
sample information”, and confirm the sample information If you