Installation Instructions

Error! Use the Home tab to apply 标题 1 to the text that you
want to appear here.
20 FA50 Operation Manual
5.5.1 Item Set
When the scan code setting status of the reagent card is automatic,
no item setting is required before measuring the reagent card;
when the scan code setting status of the reagent card is manual,
you need to manually select the item before measuring the reagent
card, and click the item setting, as shown in Fig. 6-5-2, click on the
item to be tested, and then click “Confirm” to select the item to be
tested.
Fig. 5-5-2