Operation Description

ManualsBrandsGenius ManualsAudio EquipmentMULTIMEDIA SPEAKER SYSTEMS

English

1. The USB power plug of speaker is plugged in.

2. Turn on the power and enter the LINE function by default. The red LED is

always on. At this time, the audio cable can be inserted into the audio device to play

music.

3. Short press button on the remote control to enter the Bluetooth status, and the

blue LEDs will flash alternately. At this time, you can pair the Bluetooth device. After

the pairing is successful, there will make a notification sound. The blue LED is always

on. At this time, the audio device can play music.

4. Short press button on the remote control to stop playing music, click again to

resume playback. Short press on the remote control, increase the volume, press

twice consecutively to go to the previous song, long press button on the remote

control to increase the volume, and the speaker sounds louder. Short press on

the remote control, the volume decreases, press twice consecutively to go to the

next track, long press button on the remote control to decrease the volume,

and the speaker sound is reduced.

5. Pairing: In the Bluetooth status, long press button on the remote control for 3

seconds. When the speaker will make a notification sound, it indicates that the

current pairing device is released and the pairing mode is entered. The blue LED

flash alternately. At this time, Bluetooth device pairing can be performed.

6. After press button on the remote control to enter the Bluetooth mode. If there

is a paired device, it will return to the paired device. If there is no paired device, it

will enter the pairing mode.

7. In pairing mode, search for Bluetooth pairing device 3 times, and it will

automatically turn off if there is no signal for 5 minutes in Bluetooth mode.

8. Turn off: Long press the button for 3 seconds to turn off power and the LED.

9. After restarting, the volume level will automatically return to the middle value, and

the last volume level will not be remembered.

Summary of content (4 pages)

PAGE 1
English Operation Description 1. The USB power plug of speaker is plugged in. 2. Turn on the power and enter the LINE function by default. The red LED is always on. At this time, the audio cable can be inserted into the audio device to play music. 3. Short press button on the remote control to enter the Bluetooth status, and the blue LEDs will flash alternately. At this time, you can pair the Bluetooth device. After the pairing is successful, there will make a notification sound.
PAGE 2
English Button Function Status Function Button Operation Turn off Turn on Short press the button Power on Bluetooth Short press button Power on Line Short press button Power on Turn off Long press the button for 3 seconds Turn off power and LED. 2 Bluetooth / Line Increase Volume Short press button Long press button Short press the button to increase volume. Long press the button to increase volume continuously.
PAGE 3
English Status 5 Function Button Operation Description Bluetooth Next Track Press twice button Press twice button consecutively to go to the next track Play music Pause Short press button Short press button to stop playing music, click again to resume playback. Line Mute Short press button Short press the button enters to mute status. Press it again, the music unmute. PAIR Long press the button for 3 seconds Long press the button for 3 seconds.
PAGE 4
English FCC warning: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.