User Guide

TEST1 UNPLUGGED CODING
To test Unplugged coding with GENIBOT that the Optical image sensor will automatically detect it and its card name will be notified
through the Speaker. GENIBOT can start as simply as make a coding data set.
TAP UNPLUGGED CARD
Tap Unplugged coding card for programming the robot. Coding data set should be placed
between Start and End card. When making coding data set completes GENIBOT will start
after 2seconds that last card in data set should be End card.
1
7
PRESS BUTTON TO START UNPLUGGED DATA
SET IN MEMORY
If Unplugged data set is in volatile Flash memory
GENIBOT can start with its data set again by
pressing the Power button.
2
“Move
Backward”