Product Manual

2 Genie IWP Super Series Part No. 145358
Operator’s Manual Fifth Edition • Third Printing
SAFETY RULES
Tip-over Hazards
Do not raise the platform unless the machine is on
a firm, level surface.
Do not move the machine while the platform is
raised.
Do not cause a horizontal force or side load to the
machine by raising or lowering a fixed or
overhanging load.
Do not transport tools and materials unless they
are evenly distributed and can be safely handled
by the person in the platform.
Do not place or attach overhanging loads to any
part of this machine.
Do not place ladders or scaffolds in the platform or
against any part of this machine.
Do not push off or pull toward any object outside
the platform.
Maximum allowable 50 lbs 222 N
side force, ANSI & CSA models
Maximum allowable 45 lbs 200 N
manual force, CE & AUS models
Do not operate the machine near drop-offs, holes,
bumps, debris, unstable or slippery surfaces or
other possible hazardous conditions.
Do not use the machine on a moving or mobile
surface or vehicle.
Do not alter or disable machine components that in
any way affect safety and stability.
Do not operate the machine in strong or gusty
winds. Do not increase the surface area of the
platform or the load. Increasing the area exposed
to the wind will decrease machine stability.
Occupants, equipment and material shall not
exceed the maximum platform capacity.
ANSI, CSA, AUS & CE models
Maximum capacity 350 lbs 159 kg
Maximum occupancy 1 person
ANSI, AUS & CE models
Maximum capacity 300 lbs 136 kg
IWP-20S with outreach option
Maximum occupancy 1 person