Product Manual

Sixth Edition • Fourth Printing Operator's Manual
Specifications
Part No. T107026 GS-30 • GS-32 • GS-46 69
Model GS-3232
Height, working maximum 37.9 ft 11.6 m
Height, working drivable 28 ft 8.5 m
Height, platform maximum 31.9 ft 9.7 m
Height, platform drivable 22 ft 6.7 m
Height, stowed maximum 94 in 238 cm
Height, stowed maximum
rails folded
80 in 204 cm
Platform height, stowed
maximum
50.75 in 129 cm
Height, guard rails 43 in 109 cm
Width 32 in 81 cm
Length, stowed 96 in 244 cm
Length, platform extended 131 in 333 cm
Platform extension length 35 in 89 cm
Platform dimensions,
(length x width)
89 x 32 in 226 x 81 cm
Maximum load capacity 500 lbs 227 kg
Maximum wind speed 28 mph 12.5 m/s
Wheelbase 73 in 185 cm
Turning radius (outside) 84 in 212 cm
Turning radius (inside) 0 in 0 cm
Ground clearance 3.5 in 8.9 cm
Ground clearance
Pothole guards deployed
0.88 in 2.2 cm
Weight 5185 lbs 2352 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Power source 4 Batteries, 6V 225AH
System voltage 24V
Drive control Proportional
Lift control 2 Speed
AC outlet in platform Standard
Maximum hydraulic pressure
(functions)
3500 psi 241 bar
Tire size 15 x 5 x 11.25 in
Vibration value does not exceed 2.5 m/s
2
Operating Temperature
Minimum -20°F -29°C
Maximum 150°F 66°C
Airborne noise emissions
Sound pressure level at ground workstation <70 dBA
Sound pressure level at platform workstation <70 dBA
Maximum slope rating, stowed position
25% (14°)
Maximum side slope rating, stowed
position
25% (14°)
Note: Slope rating is subject to ground conditions and
adequate traction.
Drive speeds
Stowed, maximum 2.2 mph 3.5 km/h
Platform raised,
maximum
0.5 mph
40 ft/54 sec
0.8 km/h
12.2 m/54 sec
Floor loading information, GS-3232
Tire load maximum 1700 lbs 771 kg
Tire contact pressure 113 psi
7.98 kg / cm
2
781 kPa
Occupied floor pressure 291 psf
1420 kg / m
2
13.92 kPa
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.