Product Manual

Sixth Edition • Fourth Printing Operator's Manual
Specifications
Part No. T107026 GS-30 • GS-32 • GS-46 67
Model GS-2032
Height, working maximum 26 ft 7.9 m
Height, platform maximum 20 ft 6.1 m
Height, stowed maximum fixed
rail
80 in 202 cm
Height, stowed maximum rails
up
84 in 212 cm
Height, stowed maximum rails
folded
70 in 178 cm
Platform height, stowed
maximum
40.5 in 103 cm
Height, guard rails 43 in 109 cm
Width 32 in 81 cm
Length, stowed 96 in 244 cm
Length, platform extended 131 in 333 cm
Platform extension length 35 in 89 cm
Platform dimensions,
(length x width)
89 x 32 in 226 x 81 cm
Maximum load capacity 800 lbs 363 kg
Maximum wind speed 28 mph 12.5 m/s
Wheelbase 73 in 185 cm
Turning radius (outside) 84 in 212 cm
Turning radius (inside) 0 in 0 cm
Ground clearance 3.5 in 8.9 cm
Ground clearance Pothole
guards deployed
0.88 in 2.2 cm
Weight 3554 lbs 1612 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Power source 4 Batteries, 6V 225AH
System voltage 24V
Drive control Proportional
Lift control 2 Speed
AC outlet in platform Standard
Maximum hydraulic pressure
(functions)
3500 psi 241 bar
Tire size 15 x 5 x 11.25 in
Vibration value does not exceed 2.5 m/s
2
Operating Temperature
Minimum -20°F -29°C
Maximum 150°F 66°C
Airborne noise emissions
Sound pressure level at ground workstation <70 dBA
Sound pressure level at platform workstation <70 dBA
Maximum slope rating, stowed position
30% (17°)
Maximum side slope rating, stowed
position
30% (17°)
Note: Slope rating is subject to ground conditions and
adequate traction.
Drive speeds
Stowed, maximum 2.2 mph 3.5 km/h
Platform raised,
maximum
0.5 mph
40 ft/54 sec
0.8 km/h
12.2 m/54 sec
Floor loading information, GS-2032
Tire load maximum 1699 lbs 771 kg
Tire contact pressure 113 psi
7.97 kg / cm
2
781 kPa
Occupied floor pressure 223 psf
1088 kg / m
2
10.66 kPa
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.