Product Manual

Operator's Manual Sixth Edition • Fourth Printing
Specifications
66 GS-30 • GS-32 • GS-46 Part No. T107026
Model GS-1930
Height, working maximum 25.1 ft 7.7 m
Height, platform maximum 19.1 ft 5.8 m
Height, stowed maximum
fixed rail
79 in 199 cm
Height, stowed maximum
rails up
83 in 210 cm
Height, stowed maximum
rails folded
69 in 175 cm
Platform height, stowed
maximum
39.5 in 100 cm
Height, guard rails 43 in 109 cm
Width 30 in 76 cm
Length, stowed 72 in 183 cm
Length, platform extended 107 in 272 cm
Platform extension length 35 in 89 cm
Platform dimensions,
(length x width)
64 x 29 in 164 x 75 cm
Maximum load capacity 500 lbs 227
k
g
Maximum wind speed 28 mph 12.5 m/s
Wheelbase 52 in 132 cm
Turning radius (outside) 61 in 155 cm
Turning radius (inside) 0 in 0 cm
Ground clearance 2.4 in 6.1 cm
Ground clearance
Pothole guards deployed
0.75 in 1.9 cm
Weight 2748 lbs 1246
k
g
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Power source 4 Batteries, 6V 225AH
System voltage 24V
Drive control Proportional
Lift control 2 Speed
AC outlet in platform Standard
Maximum hydraulic pressure
(functions)
3500 psi 241 bar
Tire size 12 x 4.5 x 8 in
Vibration value does not exceed 2.5 m/s
2
Operating Temperature
Minimum -20°F -29°C
Maximum 150°F 66°C
Airborne noise emissions
Sound pressure level at ground workstation <70 dBA
Sound pressure level at platform workstation <70 dBA
Maximum slope rating, stowed position
25% (14°)
Maximum side slope rating, stowed
position
25% (14°)
Note: Slope rating is subject to ground conditions and
adequate traction.
Drive speeds
Stowed, maximum 2.5 mph 4.0
k
m/h
Platform raised,
maximum
0.5 mph
40 ft/55 sec
0.8
k
m/h
12.2 m/55 sec
Floor loading information, GS-1930
Tire load maximum 1302 lbs 591
k
g
Tire contact pressure 145 psi 10.18
k
g / cm
2
998 kPa
Occupied floor pressure 240 psf 1172
k
g / m
2
11.50 kPa
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.