Product Manual

Sixth Edition • Fourth Printing Operator's Manual
Specifications
Part No. T107026 GS-30 • GS-32 • GS-46 65
Specifications
Model
GS-1530
Height, working maximum 22 ft 6.7 m
Height, platform maximum 16 ft 4.9 m
Height, stowed maximum
fixed rail
77 in 196 cm
Height, stowed maximum
rails up
81 in 206 cm
Height, stowed maximum
rails folded
68 in 172 cm
Platform height, stowed
maximum
38.2 in 97 cm
Height, guard rails 43 in 109 cm
Width 30 in 76 cm
Length, stowed 72 in 183 cm
Length, platform extended 107 in 272 cm
Platform extension length 35 in 89 cm
Platform dimensions,
(length x width)
64 x 29 in 164 x 75 cm
Maximum load capacity 600 lbs 272 kg
Maximum wind speed 28 mph 12.5 m/s
Wheelbase 52 in 132 cm
Turning radius (outside) 61 in 155 cm
Turning radius (inside) 0 in 0 cm
Ground clearance 2.4 in 6.1 cm
Ground clearance
Pothole guards deployed
0.75 in 1.9 cm
Weight 2594 lbs 1177 kg
(Machine weights vary with option configurations. See
serial label for specific machine weight.)
Power source 4 Batteries, 6V 225AH
System voltage 24V
Drive control Proportional
Lift control 2 Speed
AC outlet in platform Standard
Maximum hydraulic pressure
(functions)
3500 psi 241 bar
Tire size 12 x 4.5 x 8 in
Vibration value does not exceed 2.5 m/s
2
Operating Temperature
Minimum -20°F -29°C
Maximum
150°F 66°C
Sound pressure level at ground workstation <70 dBA
Sound pressure level at platform workstation <70 dBA
Maximum slope rating, stowed position
30% (17°)
Maximum side slope rating, stowed
position
30% (17°)
Note: Slope rating is subject to ground conditions and
adequate traction.
Drive speeds
Stowed, maximum 2.5 mph 4.0 km/h
Platform raised,
maximum
0.5 mph
40 ft/55 sec
0.8 km/h
12.2 m/55 sec
Floor loading information, GS-1530
Tire load maximum 1175 lbs 533 kg
Tire contact pressure 131 psi
9.19 kg / cm
2
900 kPa
Occupied floor pressure 238 psf
1162 kg / m
2
11.40 kPa
Note: Floor loading information is approximate and does
not incorporate different option configurations. It should
be used only with adequate safety factors.
Continuous improvement of our products is a Genie
policy. Product specifications are subject to change
without notice or obligation.