Product Manual

Sixth Edition • Fourth Printing Operator's Manual
Operating Instructions
Part No. T107026 GS-30 • GS-32 • GS-46 53
To Steer
1 Press and hold the drive/steer function enable
switch on the control handle.
2 Turn the steer wheels with the
thumb rocker switch located on
the top of the control handle.
To Drive
1 Press and hold the drive/steer function enable
switch on the control handle.
2 Increase speed: Slowly move the control
handle off center.
Decrease speed: Slowly move the control
handle toward center.
Stop: Return the control handle to center or
release the function enable switch.
Use the color-coded direction arrows on the
platform controls and on the platform to identify the
direction the machine will travel.
Machine travel speed is restricted when the
platform is raised.
Battery condition will affect machine performance.
Machine drive speed and function speed will drop
when the battery level indicator is flashing.
To select drive speed
The drive controls can operate in two different drive
speed modes while in the stowed position. When
the drive speed button light is on, slow drive speed
mode is active. When the drive speed button light is
off, fast drive speed mode is active.
Press the drive speed button to select
the desired drive speed.
Note: When the platform is elevated,
the drive speed button light is always
on, indicating elevated drive speed.
Driving on a slope
Determine the slope and side slope ratings for the
machine and determine the slope grade.
Maximum slope rating, stowed position:
GS-1530, GS-2032,
GS-2046 and GS-2646
30% 17°
GS-1930, GS-2632,
GS-3232 and GS-3246
25% 14°
Maximum side slope rating, stowed position:
GS-1530, GS-2032,
GS-2046, and GS-2646
30% 17°
GS-1930, GS-2632,
GS-3232 and GS-3246
25% 14°
Note: Slope rating is subject to ground conditions
and adequate traction.
Press the drive speed button to the fast drive speed
mode.