Product Manual

Sixth Edition • Fourth Printing Operator's Manual
Inspections
Part No. T107026 GS-30 • GS-32 • GS-46 35
58 Press and hold the drive/steer function enable
switch on the control handle.
59 Slowly move the control handle in the direction
indicated by the blue arrow, then in the
direction indicated by the yellow arrow.
Result: The machine should not move forward
or backward.
60 Press and hold the drive/steer function enable
switch on the control handle.
61 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
blue and yellow triangles on the control panel.
Result: The steer wheels should not turn left or
right.
62 Press and hold the high or low speed lift enable
button, and press the platform down button to
lower the platform.
63 Remove the 2x4 or similar piece of wood.
Test the Outrigger Function (GS-3232)
64 Press and hold the high speed lift enable
button.
65 Press the platform up button.
Result: The platform should raise to 22 ft /
6.7 m and stop.
66 Press and hold the outrigger enable button.
Result: The outriggers should not extend.
67 Press and hold the outrigger extend button.
Result: The outriggers should not extend.
68 Press and hold the outrigger enable button.
Press the outrigger extend button.
Result: The outriggers should not extend.
69 Fully lower the platform.
70 Press and hold the outrigger enable button.
Result: The outriggers should not extend.
71 Press and hold the outrigger extend button.
Result: The outriggers should not extend.
72 Press and hold the outrigger enable button.
Press the outrigger extend button.
Result: The outriggers should extend. The
individual outrigger indicator lights will flash
green as the corresponding outrigger extends.