Product Manual

Operator's Manual Sixth Edition • Fourth Printing
Inspections
32 GS-30 • GS-32 • GS-46 Part No. T107026
Test the Up/Down Functions
27 Press and hold the high speed lift enable
button.
28 Press the platform up button.
Result: The platform should raise. The pothole
guards should deploy.
29 Release the high speed lift enable button or the
platform up button.
Result: The platform should stop raising.
30 Press and hold the high speed lift enable
button.
31 Press the platform down button.
Result: The platform should lower. The descent
alarm should sound while the platform is
lowering.
32 Release the high speed lift enable button or the
platform down button.
Result: The platform should stop lowering.
33 Press and hold the low speed lift enable button.
34 Press the platform up button.
Result: The platform should raise. The pothole
guards should deploy.
35 Release the low speed lift enable button or the
platform up button.
Result: The platform should stop raising.
36 Press and hold the low speed lift enable button.
37 Press the platform down button.
Result: The platform should lower at the same
descent speed as high speed. The descent
alarm should sound while the platform is
lowering.
38 Release the low speed lift enable button or the
platform down button.
Result: The platform should stop lowering.
Test the Steering
Note: When performing the steer and drive function
tests, stand in the platform facing the steer end of
the machine.
39 Press and hold the drive/steer function enable
switch on the control handle.
40 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
blue triangle on the control panel.
Result: The steer wheels should turn in the
direction indicated by the blue triangle.
41 Press the thumb rocker switch on top of the
control handle in the direction indicated by the
yellow triangle, on the control panel.
Result: The steer wheels should turn in the
direction indicated by the yellow triangle.