Product Manual

Sixth Edition • Fourth Printing Operator's Manual
Controls
Part No. T107026 GS-30 • GS-32 • GS-46 25
Platform Control Panel
1 Thumb rocker switch for steer function
Press the left side of the thumb
rocker and the machine will turn in
the direction the blue triangle
points on the platform control
panel.
Press the right side of the thumb
rocker and the machine will turn in
the direction the yellow triangle
points on the platform control
panel.
2 LED diagnostic readout / battery charge
indicator
3 Platform up OR outrigger retract button
Press and hold this button and the
platform will raise OR the
outriggers will retract.
4 Numeric keypad (if equipped)
5 Platform down OR outrigger extend button
Press and hold this button and the
platform will lower OR the
outriggers will extend.
6 Outrigger indicator lights
During outrigger extension,
lights flash green. As each
outrigger contacts the ground,
lights turn solid green. Any
time the outrigger extension
procedure is interrupted, the
lights will flash green indicating
the outriggers are not
contacting the ground or the
outriggers are not fully
deployed. During outrigger
retraction lights turn solid
green. As each outrigger fully
retracts, lights turn off. Lights
will turn solid red, indicating
the corresponding outrigger is
at end of stroke.
7 Outrigger enable button
Press and hold this button to
activate the outrigger function.
8 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions. Pull out the red
Emergency Stop button to the on position to
operate the machine.