Product Manual

Sixth Edition • Fourth Printing Operator's Manual
Controls
Part No. T107026 GS-30 • GS-32 • GS-46 23
Platform Control Panel
1 Thumb rocker switch for steer function
Press the left side of the thumb
rocker and the machine will turn in
the direction the blue triangle
points on the platform control
panel.
Press the right side of the thumb
rocker and the machine will turn in
the direction the yellow triangle
points on the platform control
panel.
2 LED diagnostic readout / battery charge
indicator
3 Platform up button
Press and hold the platform up
button and the platform will raise.
4 Numeric keypad (if equipped)
5 Platform down button
Press and hold the platform down
button and the platform will lower.
6 Red Emergency Stop button
Push in the red Emergency Stop button to the
off position to stop all functions. Pull out the red
Emergency Stop button to the on position to
operate the machine.
7 Low speed lift enable button
Press and hold this button to
activate the low speed platform
function.
8 High speed lift enable button
Press and hold this button to
activate the high speed platform
function.
9 Drive speed select button
Press this button to activate the
slow drive function. The indicator
light will be on when slow drive is
selected.
10 Horn button
Press the horn button and the horn
will sound. Release the horn button
and the horn will not sound.
11 Proportional control handle and function
enable switch for drive and steer functions
Press and hold the function enable switch on
the platform control handle to activate the drive
or steer function.
Move the drive control handle in the direction
indicated by the blue and yellow arrows and
the machine will move forward or reverse.
Press the thumb rocker switch in the direction
indicated by the blue and yellow triangles and
the steer wheels will turn left or right.