Product Manual

Operator's Manual Fifth Edition • Third Printing
Operating Instructions
36 GR-12 • GR-15 • GR-20 Part No. 133571
To Steer
1 Press and hold the drive/steer function enable
switch on the control handle.
2 Turn the steer wheels with the
thumb rocker switch located on
the top of the control handle.
To Drive
1 Press and hold the drive/steer function enable
switch on the control handle.
2 Increase speed: Slowly move the control
handle off center.
Decrease speed: Slowly move the control
handle toward center.
Stop: Return the control handle to center or
release the function enable switch.
Use the color-coded direction arrows on the
platform controls and on the platform to identify the
direction the machine will travel.
Machine travel speed is restricted when the
platform is raised.
Battery condition will affect machine performance.
Machine drive speed and function speed will drop
when the battery level indicator is flashing.
To select drive speed
The drive controls can operate in two different
drive speed modes while in the stowed position.
When the drive speed button light is on, slow drive
speed mode is active. When the drive speed
button light is off, fast drive speed mode is active.
Press the drive speed button to select
the desired drive speed.
Note: When the platform is elevated,
the drive speed button light is always
on, indicating elevated drive speed.
Controller Identification
Use these instructions if the
decal on your platform controls
has these buttons.
+
-
=
+
-
=