Product Manual

Fifth Edition • Third Printing Operator's Manual
Work Area Safety
Part No. 133571 GR-12 • GR-15 • GR-20 11
Maximum capacity - GR-20
Standard platform
Platform without extension 350 lbs 159kg
Platform retracted 350 lbs 159 kg
Platform extended
–
Platform
only
100 lbs 45 kg
Platform extended
–
Extension only
250 lbs 113 kg
Maximum occupants 1
350 lbs/159 kg
Extension only
250 lbs/113 kg
Platform only
100 lbs/45 kg
AWP platform
350 lbs 159kg
Maximum occupants 1
Do not raise the platform
unless the machine is on a
firm, level surface.
Do not depend on the tilt
alarm as a level indicator.
The tilt alarm sounds at the
platform controls and the
ground controls when the
machine is on a severe
slope.
Do not drive over 0.5 mph / 0.8 km/h with the
platform raised.
Do not raise the mast when wind speeds may
exceed 28 mph / 12.5 m/s. If wind speeds exceed
28 mph / 12.5 m/s when the platform is raised,
lower the platform and do not continue to operate
the machine.
Do not operate the
machine in strong or
gusty winds. Do not
increase the surface area
of the platform or the
load. Increasing the area
exposed to the wind will
decrease machine
stability.
Use extreme care and
slow speeds while driving
the machine in the
stowed position across
uneven terrain, debris,
unstable or slippery
surfaces and near holes
and drop-offs.
Do not drive the machine on or near uneven terrain,
unstable surfaces or other hazardous conditions
with the platform raised.
Do not use the machine as a crane.
Do not push the machine or other objects with the
platform.
Do not contact adjacent structures with the
platform.
Do not tie the platform to adjacent structures.
Do not place loads outside the platform perimeter.
The work station tray is considered part of the
platform.