Owner's Manual

Medium Duty Operator

GCL-MT

www.geniecompany.com 08-12

3) Insert the carriage into the tracks as shown in Fig. 3.

NOTE: One end of the carriage has a notch (Detail A) which will be

used to locate the chain pin (Detail B). This end of the carriage faces

the front spreader bracket and away from the power unit.

4) Attach the front spreader bracket to the front of the operator

tracks with two (2) track bolts and two (2) locknuts (check hole

alignment before installing).

5) Position the idler pulley inside the track and insert the

3/8" x 4-1/2" clevis pin. Secure the clevis pin using the

hitch pin. Fig. 4.

NOTE: Track bolts MUST be installed

from inside the track.

Drawbar Assembly (cont’)

Figure 3

CARRIAGE

TRACK

NOTCH

DETAIL A

DETAIL B

CHAIN

EXPLODED VIEW ASSEMBLED VIEW

CLEVIS PIN

LOCK NUT

FRONT

SPREADER

BRACKET

TRACK

BOLTS

LOCK

NUT

HITCH PIN

IDLER PULLEY

TRACK

Figure 4