Owner's Manual

4.1
www.geniecompany.com 03-12
NOTE: Drawbar tracks must be (29) inches longer than the door’s height. Tracks
have been sized properly and pre-punched for the chain guide assemblies from
the factory.
H
The Trolley Operator consists of the Power Unit (A), Drawbar Track (B),
Chain Guides (C), Front Spreader (D), Front Idler Pulley (E), Drive Chain (F), Drive
Sprocket (G) and Drawbar Arm (H)**. The Drawbar track length, chain length and
quantity of chain guides will vary by door heights. Fig. 1.
1) Attach Track to Power Unit using four (4) 7/16”-14 x 1” track
bolts, 7/16”-14 keps nuts and 7/16” lock washers (provided). Fig. 2.
Section 4: Installation
Drawbar Assembly
Figure 1
A
B
G
F
C
E
D
** Trolley Units are also available in Sidemount and
Dual Trolley versions.
HP KIT PART NO.
1/2, 3/4, 1 Sidemount Trolley Kit OPAKSMTGT.S
1/2, 3/4, 1 Dual Trolley Kit OPAKDTGT.S
SIDEMOUNT TROLLEY utilizes a HOIST Operator
in combination with a Sidemount Trolley Kit.
HEX HEAD
BOLTS
Figure 2
Heavy Duty Operator
GCL-GT