Owner's Manual

4.2
www.geniecompany.com 03-12
Drawbar Assembly (continued)
2) Attach the chain guide assemblies to the drawbar tracks using round
head screws and locknuts (provided). Fig. 3.
Figure 3
CHAIN GUIDE BRACKET
TRACK BOLTS
/LOCKNUTS
PLASTIC CHAIN GUIDE
NOTE: Space chain guides evenly between operator and header. Add a chain
guide for every 4 feet of door height per chart.
NOTE: Chain Guide mounting holes have been pre-drilled at standard loca-
tions along the track. If different locations are needed, hole size should be
9/32" dia. Be sure to de-burr the holes.
UNDER 12’
12’ to 16’ 16’ to 20’ 20’ to 24’
2 3 4 5
CAUTION : Verify that screws are properly
seated in track. Failure to seat screws can cause carriage
to bind in door track.
Heavy Duty Operator
GCL-GT