Product Manual

Operator’s ManualFourth Edition • Third Printing
Part No. 145356 Genie AWP Super Series 3
SAFETY RULES
Do not raise the platform unless the machine is
level. Do not set the machine up on a surface
where it cannot be leveled using only the leveling
jacks.
Do not cause a horizontal force or side load to the
machine by raising or lowering a fixed or
overhanging load.
Do not push off or pull toward any object outside
the platform.
Maximum allowable
side force
ANSI / CSA
50 lbs / 222 N
Maximum allowable
manual force
CE / AUS
45 lbs / 200 N
Do not operate the machine near drop-offs, holes,
bumps, debris, unstable or slippery surfaces or
other possible hazardous conditions.
Do not alter or disable machine components that in
any way affect safety and stability.
Do not replace items critical to stability with items
of different weight or specification. Use only Genie
authorized replacement parts.
Do not push the Genie AWP from the platform side
of the machine.
When moving the machine with a forklift or other
transport vehicle, the platform should be fully
lowered, the machine should be turned off and no
personnel shall remain in the platform.
Do not use the machine on a moving or mobile
surface or vehicle.