Replacement Part List
11
WIRELESS WALL CONSOLE PROGRAMMING (ABBREVIATED)
1. Press and hold the program button on the opener until the round LED turns blue, then
release.
2. The round LED will go out and the long LED will begin ashing purple. Fig. 3.
3. Press the DOOR button on the WALL CONSOLE 3 times or until door operates.
STEP 1) Program Wall Console to Garage Door Opener
1. DOOR Button - Runs garage door opener.
2. DELAY Button - Adds a 10+ second delay for door operation. Press the
delay button and door will automatically operate after set delay.
3. LIGHT Button - Overrides the automatic timed light function of the
garage door opener.
1
2
3
STEP 2) Operating the Door with Wall Console
The Wireless Wall Console includes self diagnostic LEDs
• LED Blue Blink = Indicates NORMAL status.
• LED Red Blink = Indicates low battery.
Wireless Wall Console LED Signals:
Please see instructions that
accompany wireless wall console.
Open cover &
remove battery
tab
prior to
programming.
Battery Tab
PRGM
SET
NOTE: The openers LEARN LED will time out in 30 seconds.
Programming must be completed within 30 seconds.
Solid Blue
PRESS
&
RELEASE
Flashing Purple
PRGM
SET
Pleaseseecompleteinstructionsthataccompanywirelesswallconsole.