Use and Care Manual

One-Piece Doors

ATTACHING DOOR BRACKET TO DOOR

NOTE: Center bracket on door as high as possible, preferably top edge.

ATTACHING DOOR ARM TO DOOR BRACKET

Using bracket, mark holes on door or frame and drill

5/32" hole completely through door frame.

Door centerlineDoor centerline

Secure bracket with 5/16" x 2" or 5/16" x 4-1/2" carriage

bolts and nuts or drill 1/8" pilot holes and secure with 1-1/2"

to 2" lag bolts. (Bolts, nuts, and screws not furnished.)

Screw drive models:

One-Piece Doors will only accept a straight door arm.

Straight door arm (not included)Straight door arm (not included)

Curved door armCurved door arm

3/8" Lock nut3/8" Lock nut

3/8"-16 x 7/8"

Bolt

Chain/belt drive models:

One-Piece Doors will only accept a straight door arm.

Straight door arm (not included)Straight door arm (not included)

Straight door armStraight door arm

3/8" Lock nut3/8" Lock nut

3/8"-16 x 7/8"

Bolt

Secure door arm to the door bracket and with clevis pin

and cotter pin.

Clevis pinClevis pin

Door bracketDoor bracket

Cotter pinCotter pin

Straight door arm