- GENICOM LLC User Guide printer LN45, mL450
Table Of Contents
- How This Manual is Organized
- Preface
- Unpacking and Installing Your Printer
- About this Chapter
- Installation Precautions
- Unpacking the Printer
- Installing the EP Cartridge
- Adding paper to the 500-sheet universal paper cassette
- Connecting the Parallel Cable
- Connecting the Ethernet Cable
- Connecting the Power Cord
- Turning the Printer On
- Selecting a Display Language
- Installing Printer Drivers
- Printing a Configuration Summary
- Printing a Test Page
- Printing PCL and PostScript Font Lists
- Turning the Printer Off
- Printer and Options Parts and Functions
- Understanding Paper, Paper Paths, Paper Delivery and Paper Loading
- About this Chapter
- Paper
- Paper Size Requirements
- Media Sizes Supported
- Media Types supported
- Paper Orientation
- Long and Short Edge Duplex Binding in Portrait and Landscape Orientations
- Paper Paths
- Paper Delivery
- Adding paper to the 500-sheet paper cassette, Tray 1 or Tray 2
- Adding paper to the multi bypass feeder
- Adding paper to the HCF unit (2500-sheet)
- Loading envelopes into the envelope feeder
- Understanding and Navigating the Control Panel Menus
- Printer Consumables, Cleaning and Maintenance
- Troubleshooting
- About this Chapter
- Solving Printer Power-on Problems
- Solving Print Quality Problems
- Clearing Paper Jams
- Clearing Paper Jams from Area A
- Clearing Paper Jams from Area B
- Clearing Paper Jams from Area C
- Clearing Paper Jams from Area E
- Clearing Paper Jams from Area F
- Clearing Paper Jams from Area H
- Clearing Paper Jams from Tray 1
- Clearing Paper Jams from Tray 2
- Clearing Paper Jams from Trays 3, 4 and 5 in the HCF unit
- Clearing Paper Jams from the Multi-Bypass Feeder (MBF)
- Clearing Paper Jams from the Envelope Feeder
- Control Panel LCD Messages
- Ethernet Network Interface Troubleshooting
- Using DRAM DIMMs, FLASH DIMMs and Power-on Files
- General Information
- Safety Notes and Regulatory Compliances
- Printing Font Summaries
- Frequently Used Ethernet Commands
- GENICOM Customer Support and Part Numbers
Publication No. GEG-99126 Genicom Aug 01
viii GENICOM LN45 and Intelliprint mL450 Installation Guide
Navigating the Control Panel Menus 4-4
Menu Structure 4-6
Paper Menu 4-7
Interface Menu 4-10
PS Menu 4-12
PCL Menu 4-14
System Menu 4-17
Quality Menu 4-19
Functions Menu 4-20
FLASH Menu 4-20
DISK Menu 4-21
Status Menu 4-22
Chapter 5 Printer Consumables, Cleaning and
Maintenance
About this Chapter 5-2
Replacing the EP Cartridge 5-2
Cautions on handling the EP cartridge 5-2
Cautions on storing the EP cartridge 5-2
When to replace the EP cartridge 5-2
Replacing the EP cartridge (for standard configuration) 5-3
Replacing the EP cartridge (when options are installed) 5-8
Replacing the Fuser 5-13
Replacing the Transfer Roller 5-19
Replacing the Feed Rollers 5-20
Tray 5 (HCF Unit) 5-23
Tray 4 (HCF Unit) 5-25
Cleaning 5-26
Clean the exterior of the printer 5-27
Check the interior of the printer 5-27
Daily Maintenance 5-28
Preparing the Printer for a Period of Extended Non-Use 5-28
Relocating the Printer 5-30
Chapter 6 Troubleshooting
About this Chapter 6-2